Recherche avancée
recherches apparentées: Bluetooth, Virtual Reality, android, smart phone, mtk, smart watch, Keyboard, OPENBOX Voir tous
Image de Solar Kit for 1800W Solar Water Heating 6x PV Solar Panel

Solar Kit for 1800W Solar Water Heating 6x PV Solar Panel

SKU: FS9100359
The set does not include mounting brackets for panels and a boiler.
Reproduction is welcome and allowed for free circulation only.
     

Solar Kit for 1800W Solar Water Heating 6x PV Solar Panel

Description
Solar set for heating water in boilers

The set consists of 6 monocrystalline PV panels with a self-cleaning Anti-Dust coating with a power of 310W each, the inverter and a complete 25-meter-long cabling, terminated on one side with MC4 connectors, and on the other with eyelet connectors for the converter.

The set does not include mounting brackets for panels and a boiler.

The inverter allows the direct use of photovoltaic panel systems to power heating devices such as electric boilers, heaters, heating mats, etc.

The system is simple, it only requires the connection of typical photovoltaic panels with an operating voltage of about 32V or the appropriate number of others, and an energy receiver, e.g. an electric boiler, underfloor heating.

Direct current generated in panels, which cannot be supplied directly to heating devices, is converted in the converter into alternating current, which can be used to supply heating devices.

The maximum power of the system is 3kW, the converter has a priority output "1", which always has voltage, and a dependent output "2", which is turned on when no energy is consumed on the output "1" and turned off when energy is taken from the output again " 1 ".

This allows you to connect two heating devices, e.g. two boilers, one of which will be heated first, and the other in a situation when the thermostat of the former stops receiving energy from the converter. Thanks to the implemented MPPT function, the converter will automatically adapt to the heater's power and set its operating point so that the energy received from the photovoltaic panels system is maximum.

CONVERTER PARAMETERS:
Input voltage [VDC]: 120 to 350 (VDC)
Output voltage [VAC]: 120 to 350 (VAC)
Maximum power: 3 kW
MPPT function: YES
Connection of PV panels: series or series parallel
Voltage waveform at the output: modified sine
VAC output No. 1: priority
VAC output No. 2: Dependent *
Under / over voltage protection: YES
Thermal protection: YES
Overload protection: YES
Working temperature: -25 ° C ~ + 55 ° C
Efficiency:> 94%
Cooling: Active
Power connection: M6 screw connection
230V output socket: 2 x E (with pin)
Housing: Aluminum
Degree of protection (IP): IP21
Dimensions LxWxH [mm]: 290x190x80
Weight [kg]: 2.4 kg

PANEL PARAMETERS:
Nominal power Pmax (W): 310
Power Tolerance Pmax Maximum: 0 ~ +10
Maximum voltage Vmp [V]: 32.6
Current in nominal power lmp [A]: 9.51
Open circuit voltage VOC [V]: 40.3
Short-circuit protection [A]: 16
Short-circuit current [A]: 10.04
Module yield [%]: 18.80
NOTC: 43 ° C - 47 ° C
Temperature coefficient of Pmax: -0.408% / C
Temperature coefficient of Voc: -0.27% / C
Temperature Coefficient of Isc: + 0.045% / C
Maximum working voltage: 1000VDC
Working temperature: -40 ° C + 85 ° C
Maximum reverse current [A]: 15
Load (snow / wind): 5400 Pa / 3800 Pa
Cells: Mono 156 × 156 mm
Number of cells: 60 (6 × 10)
Module dimensions [mm]: 1640x992x35
Weight [kg]: 18.5
Glass: 3.2mm glass, toughened glass
Junction box: IP68 with 3 bypass diodes
Wires: 4mm2, 900mm
Connectors: MC4-compatible

Self-cleaning Monocrystalline Solar Panels. The coating is made in a special technology to prevent dirt deposits, 5 busbar, high energy efficiency.

Photovoltaic panels are highly effective and efficient. The used photovoltaic modules enable operation in worse lighting conditions, e.g. in the morning, in the evening or in diffused light.

The great advantage of this technology is the fact that the source of energy is the Sun - the most accessible and the easiest to use renewable energy source, with still untapped potential.

The panel is equipped with MC4 plugs that allow you to combine more modules into one matrix. Thanks to this, the panel is suitable for both domestic and commercial applications. Their work is scheduled for 25 years.

The frame of the module is made in BLACK color, which means that the installed module on the roof in dark colors perfectly matches the roof surface.

Application
Modules intended for use in residential, commercial and utility buildings, for mounting on the roof or on the ground
Charging the batteries during the day and using energy at night on yachts, camping sites, single-family houses as well as supplying LED lighting points (allotment houses)
Power supply for industrial and measuring automation or electronic devices such as radio, TV, camera, garden pumps as well as production and storage halls, undeveloped plots of land and municipal facilities
Basic features

High energy efficiency
Intended for IEC applications at 1000V DC
Self-cleaning coating. UV rays break down pollutants on the glass (photocatalysis) and the rain washes them away. Due to the hydrophilic properties of the coating, the water spreads over the glass and runs off quickly, leaving no traces in the form of stains
Exceptional performance in environments with low light intensity
Excellent resistance to mechanical stress: Certified resistance to strong wind (3800 Pa) and snow (5400 Pa) loads
High salt and ammonia resistance certified by TÜV
Positive power tolerance: 0 / + 10W
Double EL tests ensure that the panels are free from defects
Current sorted modules to improve system performance
Resistant to potential induced degradation (PID)

Set contains:
6 x monocrystalline PV panels 310 W, Anti-Dust 5 busbar coating
Solar Inverter
25 meter cable set with connectors
installation manual
Transport on a pallet
To ensure maximum safety during transport, the set is shipped on a pallet.